jnmq6452c
08-07-2011, 10:36 PM
1. Duplicate the layer blend mode to Screen,
2. Coated 2 eyes mask reverse clashes
3. stamp (alt + ctrl + shift + E)
4 . channel medley, select the color, red +54, Green +54, Blue +32
6. mixed mode - are stacked
7. adjustment of the seal layer, Image - Adjustments - Shadow / Highlight - Shadow: 50,50,Christian Louboutin Flats (http://www.christian-louboutin-sales.org/christian-louboutin-flats-c-68.html),144 high light: 0,50,30 middle tone: 20,0 0.01,0.01
8. once again stamped
9. wipe the right cheek with the seal of the sun
10. with the Dodge tool - the range of high light intensity of 50%, struck a reflective eye, fair rub the eye black,
11. once again stamped Filter - Other - High contrast, parameters 80
12 . change the layer mode to high-contrast soft, enhance contrast,
13. use your favorite usage of sharpening
14. for a long time less saturated hue of red, or other fine-tuning to attempt
1, select the material map.
2, build a fashionable canvas, filled with dark backdrop and character material onto the sheet, use the eraser tool to wipe parts of the face outdoor.
3, create a new transparent canvas (20 x 20px), the foreground color to white, use a 1px pencil tool on the canvas and under the left side of stroke.
4, Edit>> Transform>> deformation, reception the map to adjust the grid-layer nodes.
5, the layer opacity to 20%. Double-click the layer to open layer style window grid, select the outer flicker, blending mode to
6, create a new layer, use Pen tool to select a number of boxes along the grid, and fill it with black.
7, prop down the Ctrl key and click on the layer upon the black box to get selection, choose the portrait layer, mow and glue (paste layer named after the After their alley point pushes to the emulating location.
8, select the debris layer, hold down the Alt key while clicking the right keyboard directional key (point 9), to be alike to the three-dimensional effect. Layers panel seem at this time to see debris layer 10 will in appending to other debris outside of the top layer of the merger and the merged layer Double-side layer, open the Layer Style window select Gradient Overlay, the Opacity to 80%, angle 180, use # 000000 to # D58761 gradient, other attributes take default values.
9, use the brush tool to add some texture to the side effects.
10, repeat steps 6 - Step 9, obtain the following results.
11, will merge all the layers of the black box, double-click to open the Layer Style window, select Bevel and Emboss, the style of . High-light mode for the
shadow mode
12, under the debris layer to create a new layer, use brush to add cloud effects cigarette. Select the debris layer, use soft black brush painted canvas on the right edge to get the retinue discolor effect.
13, the top layer in the figure to create a new layer, again using the pen tool a number of randomly selected box, and fill it with black. The layer blending mode set to
14, the same action and step 13, but replaced by a white fill color.
15, select the character layer, Filter>> Blur>> Surface Blur, radius 5px, threshold 15. Create adjustment layer first and foremost layers, layer>> Create Adjustment Layer>> Levels, property to 10,1.25,244.
16, in mandate apt obtain cool feel, you can increase a barcode tattoo ashore his arm.
1. new gray coat, with a curve to adjust brightness, 152,124
2. cutout eyes and mouth, to be accentuated,
3. reduce the overall saturation, saturation -56
4 colors with color overlay to the entire proclivity,
5. superposition of two layers of hidden hue and color, open the Channels palette, copy the R channel,
6. a new layer paste and adjust the transparency with the color filter pattern
1. Duplicate Layer, New Adjustment Layer-channel mix, gray channel, red +64%, Green 2%, 10% blue, monochrome
2. New solid mixed layer, select 575 046 colors, blend mode to Color,
3. New Curves Adjustment Layer, ① - input 68, output 32, ② - input 114, output 68, ③ - input 208, output 197,
4. create an solid layer, select 443B25 color, blend mode to color, press Alt-click mask,
5.Ctrl + D to restore the default background color, Ctrl + Delete to fill the black mask the background color,
6 to alteration the picture in high light and dark chapters of the color transition to enrich the color, use a brush inserted in the disguise
need some color, 300 pixels, opacity 10%, stream 100%
7 fonts preparation and design
8. In order to make figures and screen colors have reverberated to the character's point of lip luster on the lips, create a new layer, select the Linear Dodge blending modes, add 90753D color, choose the brush on lip gloss, abrasive point pen, pixel 39,
9. enlarge the lip gloss reflective parts of the draw, inspect, constant adjustment, the overall picture look good after lip gloss, this time the screen has a echoed, color convert wealthy, not overwhelming, just bring out a product,
10. If the production directly with the body in the model, and people tune in to thirst after, or with the mask color to the product directly to the plug out of the product can
1. open the file, copy a layer copy of the
2. Select the duplicate layer of free become to change the shortcut key ctrl + t to make the characters more slim face shape
3. at Merge Layers (ctrl + e), the use of cutting tools to upload images from a new composition, cut off the accessory part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80, white -0,0,0, -50. halftones -0, -5, -5, -5
5. according to curve (ctrl + m) adjust overall color, RGB full-channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjustments - Color Balance (ctrl + b), the shadow -10,0, +15. High light - 10,0, +2.
7. Around the mouth with a seal tool to cover the skin evenly,
8. With a pen to circle dark bags under the eyes and face,Christian Louboutin Sandals (http://www.christian-louboutin-sales.org/christian-louboutin-sandals-c-69.html), the emergence 60, curves to brighten the constituency Dodge reduce bags under the eyes and facial muscles are not loosened statement,
9. proceeded emergence constituency 60, curve brighter, so that the face full, the output 146, input 113.
10. circle to highlight some of out, feathering 60
11. curve brighter, so that the face full, the output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin with a lasso tool, the emergence 5, copy a layer, the Duplicate the layer and move down in order to fulfill eyebrow shaping effect, stamp eyebrows, this must be very detailed
13. began to adjust your eyes, choose the part of the eye ring out, copy the layer
14. pen circle to do eye shadow zone, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part, Hue Saturation: 0, -40,0
17. Circle the details of the upper eyelid eyelash root Department, under the eye before eyelid 1 / 3, press the DELETE key to delete the selection, the exposed high-light situation,
18. remove the extra part of eye shadow, plumage 40
19. circle detail on the inside corner to the eyelid 1 / 2, press the DELETE key to delete the selection, so that exposed Highlight
20. circle the eyes out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes sunny tone reproduction curve after layer, brush pen on the back half of the left eye, showing some shadows
23. remove the pupil part
24. with a curve to adjust eye color, so that the same
25. plus eyes high light
26. circle the lips, emergence 2, high-gloss lips curve adjustments to adjust the lips color
27. adjust the nose Liang Gaoguang, adjust shadow highlight
28. with optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens fan, light 182,35 mm converge,
31. plus, where appropriate, final flash brush complete
1. establish Hue Saturation adjustment layer, Saturation -49,
2. the establishment of an optional color layer, red: -49,0, +7, -41. Yellow: 0,0,0 , -23
3. the establishment of the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26, white: 0,0, +46,0. Intermediate color: 0,0, -6,0.
5. Colors. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, ruckus reduction, sharpening, painting and simple to use tool to repair the knee approach blot,
7. plus hidden corners, production a heart-shaped selection, emergence, with curves to brighten.
1. open the original image, duplicate the layer, fill pure black, overlay mode.
2. New Hue Saturation layer: saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, gloss 0, the material 69, 0 exposure, the environment 8,
6. stamp, plus text-decoration
1. Duplicate the layer, Filter - Blur - Radial Blur: number 71, mist method - zoom, quality - good,
2. to establish a template, struck a car, then smear the dynamic cycle clashes ,
3. Levels - optional colors. Plus material, performance the whole atmosphere, with minor changes Dodge made, the main diameter of 5, the hardness of the minimum
1. to tweak the color actors,Christian Louboutin (http://www.christian-louboutin-sales.org/), adjusting a rough tone, establish Levels adjustment layer Levels full channel: 0,1.35,255. Levels Red Channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. The establishment of the Hue / Saturation adjustment layer to reduce the original image's saturation, Full Figure saturation -30
3. a Photo Filter adjustment layer, the premier step in the blue has bring an end to ..., this step is to deep yellow with a concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, hold down the ctrl-point red channel, get the selection back to the photo mask in the filter filled with black.
4. the establishment of an optional color adjustment layer, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. To brighten some of the windows, set up the Hue / Saturation adjustment layer to in other parts of the window wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, the characters and the surrounding surroundings to discriminate, set in the mask after using large soft black brush to figure as the hub angle wipe it. Levels +20, +20, +40, select midtones
1. create a new layer, fill light yellow, overlay mode, the value 247,240,197
2. copy just the yellow layer, Linear Burn mode, the mask given mushroom to a yellow motorcar, shirk automobile color through yellow,
3. adjust brightness, contrast, high light exposure part of the normal color and subject, brightness -20, contrast +64, New Saturation adjustment layer, saturation -31. to determine the ultimate brightness of the daylight to high light by the color and elaborate preponderate in the dark can be ignored,
4. Duplicate the background layer the shadow highlight adjustment to the most shadow detail as a benchmark in place, the shadow: the number 100, color width 33, radius 102, high light: the number of 0, the tone width 50, radius 30, adjustments: color improvement, +20, 0 midtone contrast, the construction of black 0.01%, the construction of White 0.01%
5. Duplicate the background layer to adjust brightness of the sky, with the exposed layer to make up the sky over deficiencies,
6.-tuning the details, to erase the sky wires, fix Clone brush will do,
7. Flatten Image, fine-tuning the details, sharpen
1. Open to copy the picture layer, Ctrl + Alt + ~, to be culling, emergence 3-5. curve brightens, approximately 18,0
2. Adjust levels: 25,1,20,245. Mongolia version of the main characters and details of some clashes
3. stamped, resurfacing of the personas to brighten the brim of the modified sharpening
4. on the back layer for color balance, midtones: -12, -10, -13 High light: +8,0, -19.
5. back layer into LAB mode
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%
7. in the new layer applied on the image, layer: mingle layers, soft mode, transparency 100%,
8. adjustment layer, the lightness channel curve adjustment, 5,0
9 on the LAB color image hue saturation adjustment, full-figure: 0, +10,0. Yellow: 0, +35,0 Green: 0, +15,0. Red: 0, -20, 0 Blue: +10, +30,0.
10. into Levels: 20,1.20,245. adjustment of the lightness channel, a gradient in the mask with a round out at the main characters, and then wipe the brush out the details
11. stamped return RGB color, color adoptions accessible for the picture, the red channel: 0,0,0, -30 on the mask clashes petals
12. stamp, New vacant layer with white brush to increase watering effect, pen oppression. 100% hardness, spacing +54%
1. get hold of handsome eyes point to increase the visual and charming copy eye out, change the eye color filter layer prototype, this effect is relatively easy to do foreigners, Asians or rather with a US-pupil or distinct
2. brighten the face, prominent face, with the lasso tool to trap the face, brightens after emergence, not too bright,
3. with the lasso tool to pluck the hair, pulled face it does not matter, can then use the eraser clean, brighten after emergence
4. comprehending the whole, it seems a unified point, the hair part of the eraser can erase a little bit,
5. cover to get a new layer (Ctral + Alt + Shift + E), with a stamp on the face of the mole-volt tools, delicate diminish in color counterweight point color, and increase the erotic point, it seems the white point,
6. Create a new transparent layer, the layer mode to soft, with dark eye shadow in the upper and lower whip add the color from the inside of the eye issue, from deep to superficial, layered with a soft brush maximum
7. Create a new transparent layer, soft mode, draw a circle with a purple eye shadow as background, if the results are not afraid to adjust the color can often use vague, kas long asuntil evenly
8. Adjust the high light areas of skin to add a new transparent layer, overlay mode, brush painted with the color of the nose, the maximum apt to detect the basis color photographs and increase high-light, the benefits that can cultivate the contrast to increase visual,
9. make the overall adjustment to increase the The new transparent layer, soft light mode to increase the area of high light color, the color change in the forehead with dark red hair and add there between, increased shadow, face red saturation is not too high, nor too low, emotion applied to the face looks like a real,
10. a new transparent layer, the soft mode, the high class of light in the nose, add some high-gloss colors, make the nose look more deeply with the contours, higher pick, can wipe his face dirty location out, or have dark areas
11. a new transparent layer, overlay mode, to the lip color, painted purple, transparency of 70%
12. a new transparent layer, positive overlay mode, 40% transparency in the neb, forehead, face where the increase in black and ruddy, add shadows with layering,
13. a new transparent layer, overlay mode, the eye shadow to be of two layers, a layer is a little light outside, inside to deep violet, the best Gaussian muddled about until evenly
14. new transparent layer, soft light mode to increase the black-purple, black make this differentiation, it seems more glamorous,
15. a new transparent layer, overlay mode, including the eye to the nasal has to face bureau, people, drawing on the light between the two lips, dark red, add a sense of contour levels, adjust the transparency of the painting is completed, may be some deep
16. side of the forehead and narrow face, deepen the color, overlay mode, the color is the red line,
17. plus there below the shadow of the lips, or mouth looks counterfeit
18. covered with the same color his face dirty place, with a straw draw next to the same color, may cover part of the hair, for a painting can be.
19. a new transparent layer, the soft mode, the next home on the green eye shadow,
20. mouth with dirty face, where the same color with a pipette, fill the new layer to the dirty place,
21 . Create a new layer Multiply mode, transparency 20%, painted black and red make up,
22. facial hair is dark brown, black hair, which hair color is lighter gray, the painting is good the hair part,
23. Create a new layer, fill color to cover the forehead close to the skin, cotton looks so rough
24. face complementary color, look more red, more praise, more to preoccupy far
25 new transparent layer, the Multiply mode, the transparency of 50%, brown on the forehead, pressed dark skin color, to enhance the contrast
26. a new transparent layer, overlay mode, 50% transparency in drawing cheeks orange, aliens face more exaggerated makeup, the red point does no matter,
27. the adjustment of the overall color, sharpening what
1. open the original document, according to their own sense of color adjustment through the adjustment of the membrane, and dermabrasion, microdermabrasion amount not also many, (Neat image plugin)
2. a new layer, color FEE7D6, ( According to the film character's skin color set), layer mode to Overlay and 25%, 20% with a brush the skin on the face and nape light wrapping,
3. functions of the detailed work, cutting out the mouth, the emergence copy (Ctrl + J), using the smudge tool to smear on the lip, the lip skin becomes soft and delicate (not too much strength)
4. Create a new layer to the lips and face color, color FDC1D6 , the layer mode to color, with a brush in the side of the lips and face painting,
5. with the Dodge tool, the scope is the high light exposure of 25% to draw the lips of the high light, with the Burn tool, the range namely intermediate, 20% of the exposure, contrast enhanced lips,
6. a new layer, color 8E1A25, brush pixel is 3, draw the inside of the inside, then draw 2 pixels outside the lip lines (high-light Dodge mask some part of the line was built)
7. circle the emergence of the nose, copy, use the smudge tool around the agreeable elegance of the nose, then use the Dodge tool range is a high light exposure of 20%, to strengthen the afterward nose high light, and then use color 422B2D, 2 pixel brush to draw the nose outline (lines light up with a better tool if to make up for the next)
8. eclosion circle replication of the eye brows with the smudge tool on the soft skin around the eyes, thinning eyebrows, and then use the Dodge tool range is a high light exposure of 15%, to strengthen the high light under the eyes, with better tools the middle range, to deepen the lines around the eyes,
9. with the stain tool to tarnish some of the careful eyes, see softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure least 20% of high light to enhance eyes and make the eyes look brighter,
10. color 080101, 3-pixel brush, draw eyelashes part (the line Dodge tools to deepen the color depth can be accustom to make up) eyelash line can also be secondhand paths and some other methods tick,
11. with the smudge tool to apply the prettier eyebrow, brow a little rough spots slightly darker color, apply diluted down along the back, then two pixels with a brush in front to draw eyebrows eyebrows lines, so eyebrows more structured,
12. Smudge tool to choose the hair brush, (according to hair texture to set brush fashion), applied the process to be applied along the hair texture, not too much force, to be applied uniform,
13. hair brush coated with a normal part to assembly, (hair must be applied carefully)
14. draw the hair texture, the new layer, layer mode to Overlay, choose a pencil to 1 pixel, (picture size to the value insistent according to figures), along the hair color is DFDFDF draw smooth texture lines
15. horsetail some choose the brush tool, brush lightly with a fork along the texture of some of the painting,Christian Louboutin Boots (http://www.christian-louboutin-sales.org/christian-louboutin-boots-c-65.html), the color layer model above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% flow, the color is white, draw dynamic forehead hair,
17. clothes and pendants with the smudge tool applied in some softer, and then choose to use the Dodge tool, the range is the high light , exposure 20%, clothes and necklaces to enhance the high light
18. synthesis of the whole image sharpening, sharpening value is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)
1. open the original image, copy the layer, the image - adjustments - desaturate
2. filter - Artistic Effects - Plastic packaging, according to the original image to depress transparency
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer of black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 . to get in front of the high-light selection to adjust the curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer,Christian Louboutin Pumps (http://www.christian-louboutin-sales.org/christian-louboutin-pumps-c-66.html), increase, or about the appropriate tone color, brightness, +4, +7 contrast
1, open lotus photo, copy the background layer.
2, to adjust levels to increase color and black and white contrast. Levels: 15,1.0,200
3, reversed after the implementation of Gaussian blur, radius 1, then work to Filter - Brush Strokes - splash. Spray radius of a color, smoothness 3
4, a new layer, set the layer blending mode to color, with pink lotus brush to paint color.
5, and then add some random text, stamp, complete.
1. into the channel panel, then use the
Channel Green - Mixed Multiply, Opacity 20%
channel red - mingled dark, opacity 100%
2. Adjustments - Color Balance - High Light - Levels: -8, +13, +11
3. blue channel during the time the applying image layer: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little bit,
Blue channel all channels 6,0 4,15
5. copy a layer copy of it, again the blue channel of operation, mixed Multiply, Opacity 50%
6. the final object to do is emphatic figures, and with the eraser, given rise to some people, pay attention to the appropriate lower transparency.
1. Copy a new layer
2. with the stamp tool to repair acne out
3. the results of the repair records pox snapshot,
4. do a Gaussian blur, intensity, texture of skin perished prevail, radius 4.0
5. snapshots, named Gaussian blur []
6. by [] to make the picture back to the repair of acne acne just when completing the state, and point [Gaussian blur ] the left skeleton, the small icon to alternate over, which is now in order to use the History Brush as the target point
7. the history brush, flat it needs at the face painting, pay attention to avoid the contour and cilia, eyebrows, etc., you can use the [key and the] key at whichever time to change brush size, to modify the minor part, if not carefully brush the bad, does not matter, at a time you in the History panel, the small icon to the left of the point acne according to [repair], and then painted, you can brush back, said at the beginning of the process is reversible
8. you can change the brush's opacity to control the intensity of your painting, the brush 20, opacity 55%
9. After the effects wear smooth, very smooth, but no skin texture, but also the next step processing
10. snapshots of grinding [smooth], every period is complete, we are the best log, you can forever go back.
11. continue to do so, Ctrl + A to select all months, again a Ctrl + C, copy under the slick effect. Then, click the History panel repair acne on [], so that the file back to the finish before the state
12.Ctrl + V to copy down the achieve effect just unlocked into the new layer and change the transparency that can be revealing some of the lower, opacity 70%
13. Click the lower, that is, not wear off that layer, to a much sharpening, the number of 140, radius 0.7,
14. This overlay, delicate skin without losing texture texture, skin lustering steps to complete, and remember to save the snapshot to complete [skin]
15. pulled below the layer 1 icon, copy the new layer, set to
1. Select the blue channel
2. Channel Mixer, check the
3. dermabrasion, body beautification characters.
4. to give people the skin and raiment with parameter default; use after effect is blue, merely also use the
6. to effect tread 6 mixed-mode to
8 ..
9. fine-tune what the characters face color, brightness, contrast, and some of the details.
10. produced for shown in the
12. to the
13. The
1. Duplicate the layer and adjust - to color,
2. curve adjustment, increase the chiaroscuro, the input 114, output 186
3. Duplicate the layer, Filter - Brush Strokes - ink profile the stroke width of 5, 10 look-strength, light intensity of 10, falling into a soft light layer mode, adjust the opacity,
4. Filter - Gaussian Blur, Radius 2.0 pixels,
5. Filter - Brush Strokes - spray, spray radius of a color, smoothness, 3,
6. add the light brown solid layer, Figure Cen Enchanters of color, adjust opacity, not transparency, some as small as feasible,
7 points out of a solid color layer and the layer in front of the eye to hide it, the new layer with the brush in the lanterns, trees, tiles, etc. with the appropriate color layer,
8. to reinstate a hidden layer, change the layer mode to overlay, to see the effect to tune the details,
9. the overall effect on the screen to fine tune, until satisfactory results, no characteristic steps vary
1. a picture with the white side of the picture landscape blueprint, as do the edges with a white border spillover effects
2. hue saturation: saturation +80, adjust the impressionist effect,
3. editor - Define Pattern.
4. to construct a white fill layer, 50% opacity, to create a transparent layer
5. pattern stamp tool, brush the cardinal diameter of 200, comes with the brush rainy medium brushes 45 election, mode regular, opacity 100% , Impressionist in front of retard,
6. in a transparent layer pattern stamp painting, large long-term time King strokes, though the small details of the multi-stroke, adjusting the opacity of the layer above to outlook strokes,
7. Copy Background layer to the color filter - splash, 71% opacity, layer mode to Overlay
8. Filter - Texture - textured, opacity 100%,
9. filter - distort - scatter light 37%
1. in RAW to adjust the brightness, contrast, later adjustment for the laying the basis,
2. join the sky material, easy transparency, make the sky into the layer,
3. New Adjustment Layer optional colors - middle color: +20, +6, +7, -4, total, a mini water color uniform,
4. filled with yellow color, opacity 54%, dark blue fill color, opacity 61 %, fill deep purple, opacity 76%,
5. fine-tuning, high light and middle tone selection method and the resulting mask, high-light selection method: calculation - Source 1: Layers merge layers, gray channel, the source 2: Layers merge layers, gray channel, Multiply blend, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply blend, opacity 100%.
7.RGB artery to get the mask, with curve adjustment, high light adjustment: Black wire grid on the left in the middle of the penultimate line, blue line to the cut point, midtone adjustment: up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall brighten,
9. boat debris to reduce saturation, Saturation: -36,
10. sharpening overall
1. Duplicate the layer and adjust the brightness, contrast, Merge Down,
2. into LAB mode, select the image using an image, to enumerate,
3. the layer mode to color, cover printed layers,
4. into the RGB channel, blue channel will be filled with black, to extract the green channel selection, will fill the selection with white,
5. Hue Saturation, Red: +20, +1,0. cyan: -7, +26,0 Other data without moving the layer mode to color,
6. into the RGB channel, select the green channel selection, anti-choice, color balance adjustment layer, select midtones , values: -10, -6, +16. shadow: +4, +5, -2 High light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel constituency, copy, paste back to RGB mode, layer mode to color, select the adjustment layer curve, the red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, the middle tone: -6,0, +3 shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2 High light: -19, -26, -40.
12. Plus the speedy effect.
1. copy the layer into a Smart Filter, you can filter for the intention of effect of adjustment
2. filter - render - lighting effects, all light, negative 17, Matte -25, 100 plastic effect, exposure of less than 32, negative 28,
3. New optional color correction membrane, red: -100, -3,03,0. Yellow: -59, -6, -23, +1 Green: +9 , +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Halftones: +16, -18, -18, -3. Black: 0,0,0, +28
1 First he took a shot a good picture.
2 with mask mask part of the sky.
3 Add the sky section, and placed in the bottom of the screen can be adjusted.
4 new layer to the third layer, primarily to adjust the picture tone.
5 changes on claim is not transparent, change the layer properties to Soft Light.
6 In order to find oil in the texture effect, in color and then add a layer above the layer of material edit
7 layer properties to Soft Light, opacity changes on demand. This opacity is 86%
8 add mask, according to the need for applicable trade-off screen content.
9 in order to strengthen a sense of texture, then create a new layer, filled with gray.
10 In the Add Noise filter to Gaussian and check the color, the number of custom.
11 layer to Soft Light.
12 according to the screen needs to be adjusted with the appropriate mask.
13 Noise, Add Noise - number 400, Gaussian distribution
1. open the original image, taking color, with a repair tool to nail the extensive mar to districts
2. Duplicate the layer a copy of Filter - Noise - Dust & Scratches, radius 10, threshold value of 6
3. to increase the mask layer a copy, click on the mask, the edges with a brush tool for people outside the smear,
4. to the layer 1 to Filter - Noise - Dust & Scratches, radius 10, the threshold 6,
5. layer a return to the History panel, dust and scratches in the top layer, rub with a brush coated with a spot where the eye shadow of the face to be careful
6. If necessitated to do the high point of the high-contrast points to retain or change the point of spiritual Levels,
7. the repair of all make reference to some parameters fine-tuning your own would be better
1. open the original image in Photoshop. As the most from living according to the low-end digital cameras, black and white field can not be well positioned, so photos will be favor this as often gray.
2. before the background copy layer, USM sharpening, number 50, radius 0.5
3. modify levels, the right sum of light as the tall, black tone for the sum left in the middle of the navel tone, increase the sunshine of the face , 0,1.0,200
4. adjust the color balance, so that the whole picture prejudiced blue, more off the face. Shadow: -30,0,0
5. Create a new layer of black and white to enhance the contrast, choose the %
7. this period the photo is quite pale, add a Hue / Saturation adjustment layer, +15 saturation.
1. to find a fold of the background, will need to generate photo shuffle the background layer, resize and harvesting, border and background to the match,
2. adjustments - hue saturation, the whole map: saturation -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,Christian Louboutin UK (http://www.christian-louboutin-sales.org/),
4. hue saturation, the whole map: 0, -80,0
5 Duplicate the layer, hue saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increase in the old sense, the number of 25%, Gaussian,
8. Blending Mode to Multiply,
9. Image - Adjustments - RP,
10. to clear the border of variegated, Select the rectangle tool to choose the inside edge of the border, DEL opener to cancel the profile part of the variegated,
11. eraser tool clashes with people around the variegated
1 Open a picture
2 Press the d key (default foreground)
3 window - Action - Creating a new behavior, name - rain
4 Duplicate the layer, in the new chart layer on the filter - pixelate - dot-based compartment size - 3 spots of the more cumbersome rain on the larger dot of the smaller more rain.
5 Image - Adjustment - Threshold 255. the layer mode to color filter
6 Filter - Blur - Motion Blur, Angle 76, from 22, to determine. The greater the distance on a rainy night the greater the distance the more rain, the smaller
7 Filter - Sharpen - in the implementation of a filter - sharpen
8 point window - Action - point to stop playing; then play the selected action (really copied layer) 3 times (so there are four rain layer)
9 to open the animation in the first frame off the top three layers on the eyes, leaving only the background and layer 1 eyes; 2 layer 1 frame the eyes closed, to open the Layer 1 copy of the eyes; 3 layer 1 frame off a copy of the eye, open the Layer 1 copy of the 2 eyes; 4 frames off layer 1 copy 2 eyes, open the Layer 1 copy 3 of the eyes in the alternative of all the frames, set up time of 0.2 seconds.
10 last save animated GIF format.
2. Coated 2 eyes mask reverse clashes
3. stamp (alt + ctrl + shift + E)
4 . channel medley, select the color, red +54, Green +54, Blue +32
6. mixed mode - are stacked
7. adjustment of the seal layer, Image - Adjustments - Shadow / Highlight - Shadow: 50,50,Christian Louboutin Flats (http://www.christian-louboutin-sales.org/christian-louboutin-flats-c-68.html),144 high light: 0,50,30 middle tone: 20,0 0.01,0.01
8. once again stamped
9. wipe the right cheek with the seal of the sun
10. with the Dodge tool - the range of high light intensity of 50%, struck a reflective eye, fair rub the eye black,
11. once again stamped Filter - Other - High contrast, parameters 80
12 . change the layer mode to high-contrast soft, enhance contrast,
13. use your favorite usage of sharpening
14. for a long time less saturated hue of red, or other fine-tuning to attempt
1, select the material map.
2, build a fashionable canvas, filled with dark backdrop and character material onto the sheet, use the eraser tool to wipe parts of the face outdoor.
3, create a new transparent canvas (20 x 20px), the foreground color to white, use a 1px pencil tool on the canvas and under the left side of stroke.
4, Edit>> Transform>> deformation, reception the map to adjust the grid-layer nodes.
5, the layer opacity to 20%. Double-click the layer to open layer style window grid, select the outer flicker, blending mode to
6, create a new layer, use Pen tool to select a number of boxes along the grid, and fill it with black.
7, prop down the Ctrl key and click on the layer upon the black box to get selection, choose the portrait layer, mow and glue (paste layer named after the After their alley point pushes to the emulating location.
8, select the debris layer, hold down the Alt key while clicking the right keyboard directional key (point 9), to be alike to the three-dimensional effect. Layers panel seem at this time to see debris layer 10 will in appending to other debris outside of the top layer of the merger and the merged layer Double-side layer, open the Layer Style window select Gradient Overlay, the Opacity to 80%, angle 180, use # 000000 to # D58761 gradient, other attributes take default values.
9, use the brush tool to add some texture to the side effects.
10, repeat steps 6 - Step 9, obtain the following results.
11, will merge all the layers of the black box, double-click to open the Layer Style window, select Bevel and Emboss, the style of . High-light mode for the
shadow mode
12, under the debris layer to create a new layer, use brush to add cloud effects cigarette. Select the debris layer, use soft black brush painted canvas on the right edge to get the retinue discolor effect.
13, the top layer in the figure to create a new layer, again using the pen tool a number of randomly selected box, and fill it with black. The layer blending mode set to
14, the same action and step 13, but replaced by a white fill color.
15, select the character layer, Filter>> Blur>> Surface Blur, radius 5px, threshold 15. Create adjustment layer first and foremost layers, layer>> Create Adjustment Layer>> Levels, property to 10,1.25,244.
16, in mandate apt obtain cool feel, you can increase a barcode tattoo ashore his arm.
1. new gray coat, with a curve to adjust brightness, 152,124
2. cutout eyes and mouth, to be accentuated,
3. reduce the overall saturation, saturation -56
4 colors with color overlay to the entire proclivity,
5. superposition of two layers of hidden hue and color, open the Channels palette, copy the R channel,
6. a new layer paste and adjust the transparency with the color filter pattern
1. Duplicate Layer, New Adjustment Layer-channel mix, gray channel, red +64%, Green 2%, 10% blue, monochrome
2. New solid mixed layer, select 575 046 colors, blend mode to Color,
3. New Curves Adjustment Layer, ① - input 68, output 32, ② - input 114, output 68, ③ - input 208, output 197,
4. create an solid layer, select 443B25 color, blend mode to color, press Alt-click mask,
5.Ctrl + D to restore the default background color, Ctrl + Delete to fill the black mask the background color,
6 to alteration the picture in high light and dark chapters of the color transition to enrich the color, use a brush inserted in the disguise
need some color, 300 pixels, opacity 10%, stream 100%
7 fonts preparation and design
8. In order to make figures and screen colors have reverberated to the character's point of lip luster on the lips, create a new layer, select the Linear Dodge blending modes, add 90753D color, choose the brush on lip gloss, abrasive point pen, pixel 39,
9. enlarge the lip gloss reflective parts of the draw, inspect, constant adjustment, the overall picture look good after lip gloss, this time the screen has a echoed, color convert wealthy, not overwhelming, just bring out a product,
10. If the production directly with the body in the model, and people tune in to thirst after, or with the mask color to the product directly to the plug out of the product can
1. open the file, copy a layer copy of the
2. Select the duplicate layer of free become to change the shortcut key ctrl + t to make the characters more slim face shape
3. at Merge Layers (ctrl + e), the use of cutting tools to upload images from a new composition, cut off the accessory part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80, white -0,0,0, -50. halftones -0, -5, -5, -5
5. according to curve (ctrl + m) adjust overall color, RGB full-channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjustments - Color Balance (ctrl + b), the shadow -10,0, +15. High light - 10,0, +2.
7. Around the mouth with a seal tool to cover the skin evenly,
8. With a pen to circle dark bags under the eyes and face,Christian Louboutin Sandals (http://www.christian-louboutin-sales.org/christian-louboutin-sandals-c-69.html), the emergence 60, curves to brighten the constituency Dodge reduce bags under the eyes and facial muscles are not loosened statement,
9. proceeded emergence constituency 60, curve brighter, so that the face full, the output 146, input 113.
10. circle to highlight some of out, feathering 60
11. curve brighter, so that the face full, the output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin with a lasso tool, the emergence 5, copy a layer, the Duplicate the layer and move down in order to fulfill eyebrow shaping effect, stamp eyebrows, this must be very detailed
13. began to adjust your eyes, choose the part of the eye ring out, copy the layer
14. pen circle to do eye shadow zone, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part, Hue Saturation: 0, -40,0
17. Circle the details of the upper eyelid eyelash root Department, under the eye before eyelid 1 / 3, press the DELETE key to delete the selection, the exposed high-light situation,
18. remove the extra part of eye shadow, plumage 40
19. circle detail on the inside corner to the eyelid 1 / 2, press the DELETE key to delete the selection, so that exposed Highlight
20. circle the eyes out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes sunny tone reproduction curve after layer, brush pen on the back half of the left eye, showing some shadows
23. remove the pupil part
24. with a curve to adjust eye color, so that the same
25. plus eyes high light
26. circle the lips, emergence 2, high-gloss lips curve adjustments to adjust the lips color
27. adjust the nose Liang Gaoguang, adjust shadow highlight
28. with optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens fan, light 182,35 mm converge,
31. plus, where appropriate, final flash brush complete
1. establish Hue Saturation adjustment layer, Saturation -49,
2. the establishment of an optional color layer, red: -49,0, +7, -41. Yellow: 0,0,0 , -23
3. the establishment of the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26, white: 0,0, +46,0. Intermediate color: 0,0, -6,0.
5. Colors. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, ruckus reduction, sharpening, painting and simple to use tool to repair the knee approach blot,
7. plus hidden corners, production a heart-shaped selection, emergence, with curves to brighten.
1. open the original image, duplicate the layer, fill pure black, overlay mode.
2. New Hue Saturation layer: saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, gloss 0, the material 69, 0 exposure, the environment 8,
6. stamp, plus text-decoration
1. Duplicate the layer, Filter - Blur - Radial Blur: number 71, mist method - zoom, quality - good,
2. to establish a template, struck a car, then smear the dynamic cycle clashes ,
3. Levels - optional colors. Plus material, performance the whole atmosphere, with minor changes Dodge made, the main diameter of 5, the hardness of the minimum
1. to tweak the color actors,Christian Louboutin (http://www.christian-louboutin-sales.org/), adjusting a rough tone, establish Levels adjustment layer Levels full channel: 0,1.35,255. Levels Red Channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. The establishment of the Hue / Saturation adjustment layer to reduce the original image's saturation, Full Figure saturation -30
3. a Photo Filter adjustment layer, the premier step in the blue has bring an end to ..., this step is to deep yellow with a concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, hold down the ctrl-point red channel, get the selection back to the photo mask in the filter filled with black.
4. the establishment of an optional color adjustment layer, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. To brighten some of the windows, set up the Hue / Saturation adjustment layer to in other parts of the window wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, the characters and the surrounding surroundings to discriminate, set in the mask after using large soft black brush to figure as the hub angle wipe it. Levels +20, +20, +40, select midtones
1. create a new layer, fill light yellow, overlay mode, the value 247,240,197
2. copy just the yellow layer, Linear Burn mode, the mask given mushroom to a yellow motorcar, shirk automobile color through yellow,
3. adjust brightness, contrast, high light exposure part of the normal color and subject, brightness -20, contrast +64, New Saturation adjustment layer, saturation -31. to determine the ultimate brightness of the daylight to high light by the color and elaborate preponderate in the dark can be ignored,
4. Duplicate the background layer the shadow highlight adjustment to the most shadow detail as a benchmark in place, the shadow: the number 100, color width 33, radius 102, high light: the number of 0, the tone width 50, radius 30, adjustments: color improvement, +20, 0 midtone contrast, the construction of black 0.01%, the construction of White 0.01%
5. Duplicate the background layer to adjust brightness of the sky, with the exposed layer to make up the sky over deficiencies,
6.-tuning the details, to erase the sky wires, fix Clone brush will do,
7. Flatten Image, fine-tuning the details, sharpen
1. Open to copy the picture layer, Ctrl + Alt + ~, to be culling, emergence 3-5. curve brightens, approximately 18,0
2. Adjust levels: 25,1,20,245. Mongolia version of the main characters and details of some clashes
3. stamped, resurfacing of the personas to brighten the brim of the modified sharpening
4. on the back layer for color balance, midtones: -12, -10, -13 High light: +8,0, -19.
5. back layer into LAB mode
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%
7. in the new layer applied on the image, layer: mingle layers, soft mode, transparency 100%,
8. adjustment layer, the lightness channel curve adjustment, 5,0
9 on the LAB color image hue saturation adjustment, full-figure: 0, +10,0. Yellow: 0, +35,0 Green: 0, +15,0. Red: 0, -20, 0 Blue: +10, +30,0.
10. into Levels: 20,1.20,245. adjustment of the lightness channel, a gradient in the mask with a round out at the main characters, and then wipe the brush out the details
11. stamped return RGB color, color adoptions accessible for the picture, the red channel: 0,0,0, -30 on the mask clashes petals
12. stamp, New vacant layer with white brush to increase watering effect, pen oppression. 100% hardness, spacing +54%
1. get hold of handsome eyes point to increase the visual and charming copy eye out, change the eye color filter layer prototype, this effect is relatively easy to do foreigners, Asians or rather with a US-pupil or distinct
2. brighten the face, prominent face, with the lasso tool to trap the face, brightens after emergence, not too bright,
3. with the lasso tool to pluck the hair, pulled face it does not matter, can then use the eraser clean, brighten after emergence
4. comprehending the whole, it seems a unified point, the hair part of the eraser can erase a little bit,
5. cover to get a new layer (Ctral + Alt + Shift + E), with a stamp on the face of the mole-volt tools, delicate diminish in color counterweight point color, and increase the erotic point, it seems the white point,
6. Create a new transparent layer, the layer mode to soft, with dark eye shadow in the upper and lower whip add the color from the inside of the eye issue, from deep to superficial, layered with a soft brush maximum
7. Create a new transparent layer, soft mode, draw a circle with a purple eye shadow as background, if the results are not afraid to adjust the color can often use vague, kas long asuntil evenly
8. Adjust the high light areas of skin to add a new transparent layer, overlay mode, brush painted with the color of the nose, the maximum apt to detect the basis color photographs and increase high-light, the benefits that can cultivate the contrast to increase visual,
9. make the overall adjustment to increase the The new transparent layer, soft light mode to increase the area of high light color, the color change in the forehead with dark red hair and add there between, increased shadow, face red saturation is not too high, nor too low, emotion applied to the face looks like a real,
10. a new transparent layer, the soft mode, the high class of light in the nose, add some high-gloss colors, make the nose look more deeply with the contours, higher pick, can wipe his face dirty location out, or have dark areas
11. a new transparent layer, overlay mode, to the lip color, painted purple, transparency of 70%
12. a new transparent layer, positive overlay mode, 40% transparency in the neb, forehead, face where the increase in black and ruddy, add shadows with layering,
13. a new transparent layer, overlay mode, the eye shadow to be of two layers, a layer is a little light outside, inside to deep violet, the best Gaussian muddled about until evenly
14. new transparent layer, soft light mode to increase the black-purple, black make this differentiation, it seems more glamorous,
15. a new transparent layer, overlay mode, including the eye to the nasal has to face bureau, people, drawing on the light between the two lips, dark red, add a sense of contour levels, adjust the transparency of the painting is completed, may be some deep
16. side of the forehead and narrow face, deepen the color, overlay mode, the color is the red line,
17. plus there below the shadow of the lips, or mouth looks counterfeit
18. covered with the same color his face dirty place, with a straw draw next to the same color, may cover part of the hair, for a painting can be.
19. a new transparent layer, the soft mode, the next home on the green eye shadow,
20. mouth with dirty face, where the same color with a pipette, fill the new layer to the dirty place,
21 . Create a new layer Multiply mode, transparency 20%, painted black and red make up,
22. facial hair is dark brown, black hair, which hair color is lighter gray, the painting is good the hair part,
23. Create a new layer, fill color to cover the forehead close to the skin, cotton looks so rough
24. face complementary color, look more red, more praise, more to preoccupy far
25 new transparent layer, the Multiply mode, the transparency of 50%, brown on the forehead, pressed dark skin color, to enhance the contrast
26. a new transparent layer, overlay mode, 50% transparency in drawing cheeks orange, aliens face more exaggerated makeup, the red point does no matter,
27. the adjustment of the overall color, sharpening what
1. open the original document, according to their own sense of color adjustment through the adjustment of the membrane, and dermabrasion, microdermabrasion amount not also many, (Neat image plugin)
2. a new layer, color FEE7D6, ( According to the film character's skin color set), layer mode to Overlay and 25%, 20% with a brush the skin on the face and nape light wrapping,
3. functions of the detailed work, cutting out the mouth, the emergence copy (Ctrl + J), using the smudge tool to smear on the lip, the lip skin becomes soft and delicate (not too much strength)
4. Create a new layer to the lips and face color, color FDC1D6 , the layer mode to color, with a brush in the side of the lips and face painting,
5. with the Dodge tool, the scope is the high light exposure of 25% to draw the lips of the high light, with the Burn tool, the range namely intermediate, 20% of the exposure, contrast enhanced lips,
6. a new layer, color 8E1A25, brush pixel is 3, draw the inside of the inside, then draw 2 pixels outside the lip lines (high-light Dodge mask some part of the line was built)
7. circle the emergence of the nose, copy, use the smudge tool around the agreeable elegance of the nose, then use the Dodge tool range is a high light exposure of 20%, to strengthen the afterward nose high light, and then use color 422B2D, 2 pixel brush to draw the nose outline (lines light up with a better tool if to make up for the next)
8. eclosion circle replication of the eye brows with the smudge tool on the soft skin around the eyes, thinning eyebrows, and then use the Dodge tool range is a high light exposure of 15%, to strengthen the high light under the eyes, with better tools the middle range, to deepen the lines around the eyes,
9. with the stain tool to tarnish some of the careful eyes, see softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure least 20% of high light to enhance eyes and make the eyes look brighter,
10. color 080101, 3-pixel brush, draw eyelashes part (the line Dodge tools to deepen the color depth can be accustom to make up) eyelash line can also be secondhand paths and some other methods tick,
11. with the smudge tool to apply the prettier eyebrow, brow a little rough spots slightly darker color, apply diluted down along the back, then two pixels with a brush in front to draw eyebrows eyebrows lines, so eyebrows more structured,
12. Smudge tool to choose the hair brush, (according to hair texture to set brush fashion), applied the process to be applied along the hair texture, not too much force, to be applied uniform,
13. hair brush coated with a normal part to assembly, (hair must be applied carefully)
14. draw the hair texture, the new layer, layer mode to Overlay, choose a pencil to 1 pixel, (picture size to the value insistent according to figures), along the hair color is DFDFDF draw smooth texture lines
15. horsetail some choose the brush tool, brush lightly with a fork along the texture of some of the painting,Christian Louboutin Boots (http://www.christian-louboutin-sales.org/christian-louboutin-boots-c-65.html), the color layer model above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% flow, the color is white, draw dynamic forehead hair,
17. clothes and pendants with the smudge tool applied in some softer, and then choose to use the Dodge tool, the range is the high light , exposure 20%, clothes and necklaces to enhance the high light
18. synthesis of the whole image sharpening, sharpening value is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)
1. open the original image, copy the layer, the image - adjustments - desaturate
2. filter - Artistic Effects - Plastic packaging, according to the original image to depress transparency
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer of black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 . to get in front of the high-light selection to adjust the curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer,Christian Louboutin Pumps (http://www.christian-louboutin-sales.org/christian-louboutin-pumps-c-66.html), increase, or about the appropriate tone color, brightness, +4, +7 contrast
1, open lotus photo, copy the background layer.
2, to adjust levels to increase color and black and white contrast. Levels: 15,1.0,200
3, reversed after the implementation of Gaussian blur, radius 1, then work to Filter - Brush Strokes - splash. Spray radius of a color, smoothness 3
4, a new layer, set the layer blending mode to color, with pink lotus brush to paint color.
5, and then add some random text, stamp, complete.
1. into the channel panel, then use the
Channel Green - Mixed Multiply, Opacity 20%
channel red - mingled dark, opacity 100%
2. Adjustments - Color Balance - High Light - Levels: -8, +13, +11
3. blue channel during the time the applying image layer: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little bit,
Blue channel all channels 6,0 4,15
5. copy a layer copy of it, again the blue channel of operation, mixed Multiply, Opacity 50%
6. the final object to do is emphatic figures, and with the eraser, given rise to some people, pay attention to the appropriate lower transparency.
1. Copy a new layer
2. with the stamp tool to repair acne out
3. the results of the repair records pox snapshot,
4. do a Gaussian blur, intensity, texture of skin perished prevail, radius 4.0
5. snapshots, named Gaussian blur []
6. by [] to make the picture back to the repair of acne acne just when completing the state, and point [Gaussian blur ] the left skeleton, the small icon to alternate over, which is now in order to use the History Brush as the target point
7. the history brush, flat it needs at the face painting, pay attention to avoid the contour and cilia, eyebrows, etc., you can use the [key and the] key at whichever time to change brush size, to modify the minor part, if not carefully brush the bad, does not matter, at a time you in the History panel, the small icon to the left of the point acne according to [repair], and then painted, you can brush back, said at the beginning of the process is reversible
8. you can change the brush's opacity to control the intensity of your painting, the brush 20, opacity 55%
9. After the effects wear smooth, very smooth, but no skin texture, but also the next step processing
10. snapshots of grinding [smooth], every period is complete, we are the best log, you can forever go back.
11. continue to do so, Ctrl + A to select all months, again a Ctrl + C, copy under the slick effect. Then, click the History panel repair acne on [], so that the file back to the finish before the state
12.Ctrl + V to copy down the achieve effect just unlocked into the new layer and change the transparency that can be revealing some of the lower, opacity 70%
13. Click the lower, that is, not wear off that layer, to a much sharpening, the number of 140, radius 0.7,
14. This overlay, delicate skin without losing texture texture, skin lustering steps to complete, and remember to save the snapshot to complete [skin]
15. pulled below the layer 1 icon, copy the new layer, set to
1. Select the blue channel
2. Channel Mixer, check the
3. dermabrasion, body beautification characters.
4. to give people the skin and raiment with parameter default; use after effect is blue, merely also use the
6. to effect tread 6 mixed-mode to
8 ..
9. fine-tune what the characters face color, brightness, contrast, and some of the details.
10. produced for shown in the
12. to the
13. The
1. Duplicate the layer and adjust - to color,
2. curve adjustment, increase the chiaroscuro, the input 114, output 186
3. Duplicate the layer, Filter - Brush Strokes - ink profile the stroke width of 5, 10 look-strength, light intensity of 10, falling into a soft light layer mode, adjust the opacity,
4. Filter - Gaussian Blur, Radius 2.0 pixels,
5. Filter - Brush Strokes - spray, spray radius of a color, smoothness, 3,
6. add the light brown solid layer, Figure Cen Enchanters of color, adjust opacity, not transparency, some as small as feasible,
7 points out of a solid color layer and the layer in front of the eye to hide it, the new layer with the brush in the lanterns, trees, tiles, etc. with the appropriate color layer,
8. to reinstate a hidden layer, change the layer mode to overlay, to see the effect to tune the details,
9. the overall effect on the screen to fine tune, until satisfactory results, no characteristic steps vary
1. a picture with the white side of the picture landscape blueprint, as do the edges with a white border spillover effects
2. hue saturation: saturation +80, adjust the impressionist effect,
3. editor - Define Pattern.
4. to construct a white fill layer, 50% opacity, to create a transparent layer
5. pattern stamp tool, brush the cardinal diameter of 200, comes with the brush rainy medium brushes 45 election, mode regular, opacity 100% , Impressionist in front of retard,
6. in a transparent layer pattern stamp painting, large long-term time King strokes, though the small details of the multi-stroke, adjusting the opacity of the layer above to outlook strokes,
7. Copy Background layer to the color filter - splash, 71% opacity, layer mode to Overlay
8. Filter - Texture - textured, opacity 100%,
9. filter - distort - scatter light 37%
1. in RAW to adjust the brightness, contrast, later adjustment for the laying the basis,
2. join the sky material, easy transparency, make the sky into the layer,
3. New Adjustment Layer optional colors - middle color: +20, +6, +7, -4, total, a mini water color uniform,
4. filled with yellow color, opacity 54%, dark blue fill color, opacity 61 %, fill deep purple, opacity 76%,
5. fine-tuning, high light and middle tone selection method and the resulting mask, high-light selection method: calculation - Source 1: Layers merge layers, gray channel, the source 2: Layers merge layers, gray channel, Multiply blend, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply blend, opacity 100%.
7.RGB artery to get the mask, with curve adjustment, high light adjustment: Black wire grid on the left in the middle of the penultimate line, blue line to the cut point, midtone adjustment: up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall brighten,
9. boat debris to reduce saturation, Saturation: -36,
10. sharpening overall
1. Duplicate the layer and adjust the brightness, contrast, Merge Down,
2. into LAB mode, select the image using an image, to enumerate,
3. the layer mode to color, cover printed layers,
4. into the RGB channel, blue channel will be filled with black, to extract the green channel selection, will fill the selection with white,
5. Hue Saturation, Red: +20, +1,0. cyan: -7, +26,0 Other data without moving the layer mode to color,
6. into the RGB channel, select the green channel selection, anti-choice, color balance adjustment layer, select midtones , values: -10, -6, +16. shadow: +4, +5, -2 High light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel constituency, copy, paste back to RGB mode, layer mode to color, select the adjustment layer curve, the red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, the middle tone: -6,0, +3 shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2 High light: -19, -26, -40.
12. Plus the speedy effect.
1. copy the layer into a Smart Filter, you can filter for the intention of effect of adjustment
2. filter - render - lighting effects, all light, negative 17, Matte -25, 100 plastic effect, exposure of less than 32, negative 28,
3. New optional color correction membrane, red: -100, -3,03,0. Yellow: -59, -6, -23, +1 Green: +9 , +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Halftones: +16, -18, -18, -3. Black: 0,0,0, +28
1 First he took a shot a good picture.
2 with mask mask part of the sky.
3 Add the sky section, and placed in the bottom of the screen can be adjusted.
4 new layer to the third layer, primarily to adjust the picture tone.
5 changes on claim is not transparent, change the layer properties to Soft Light.
6 In order to find oil in the texture effect, in color and then add a layer above the layer of material edit
7 layer properties to Soft Light, opacity changes on demand. This opacity is 86%
8 add mask, according to the need for applicable trade-off screen content.
9 in order to strengthen a sense of texture, then create a new layer, filled with gray.
10 In the Add Noise filter to Gaussian and check the color, the number of custom.
11 layer to Soft Light.
12 according to the screen needs to be adjusted with the appropriate mask.
13 Noise, Add Noise - number 400, Gaussian distribution
1. open the original image, taking color, with a repair tool to nail the extensive mar to districts
2. Duplicate the layer a copy of Filter - Noise - Dust & Scratches, radius 10, threshold value of 6
3. to increase the mask layer a copy, click on the mask, the edges with a brush tool for people outside the smear,
4. to the layer 1 to Filter - Noise - Dust & Scratches, radius 10, the threshold 6,
5. layer a return to the History panel, dust and scratches in the top layer, rub with a brush coated with a spot where the eye shadow of the face to be careful
6. If necessitated to do the high point of the high-contrast points to retain or change the point of spiritual Levels,
7. the repair of all make reference to some parameters fine-tuning your own would be better
1. open the original image in Photoshop. As the most from living according to the low-end digital cameras, black and white field can not be well positioned, so photos will be favor this as often gray.
2. before the background copy layer, USM sharpening, number 50, radius 0.5
3. modify levels, the right sum of light as the tall, black tone for the sum left in the middle of the navel tone, increase the sunshine of the face , 0,1.0,200
4. adjust the color balance, so that the whole picture prejudiced blue, more off the face. Shadow: -30,0,0
5. Create a new layer of black and white to enhance the contrast, choose the %
7. this period the photo is quite pale, add a Hue / Saturation adjustment layer, +15 saturation.
1. to find a fold of the background, will need to generate photo shuffle the background layer, resize and harvesting, border and background to the match,
2. adjustments - hue saturation, the whole map: saturation -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,Christian Louboutin UK (http://www.christian-louboutin-sales.org/),
4. hue saturation, the whole map: 0, -80,0
5 Duplicate the layer, hue saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increase in the old sense, the number of 25%, Gaussian,
8. Blending Mode to Multiply,
9. Image - Adjustments - RP,
10. to clear the border of variegated, Select the rectangle tool to choose the inside edge of the border, DEL opener to cancel the profile part of the variegated,
11. eraser tool clashes with people around the variegated
1 Open a picture
2 Press the d key (default foreground)
3 window - Action - Creating a new behavior, name - rain
4 Duplicate the layer, in the new chart layer on the filter - pixelate - dot-based compartment size - 3 spots of the more cumbersome rain on the larger dot of the smaller more rain.
5 Image - Adjustment - Threshold 255. the layer mode to color filter
6 Filter - Blur - Motion Blur, Angle 76, from 22, to determine. The greater the distance on a rainy night the greater the distance the more rain, the smaller
7 Filter - Sharpen - in the implementation of a filter - sharpen
8 point window - Action - point to stop playing; then play the selected action (really copied layer) 3 times (so there are four rain layer)
9 to open the animation in the first frame off the top three layers on the eyes, leaving only the background and layer 1 eyes; 2 layer 1 frame the eyes closed, to open the Layer 1 copy of the eyes; 3 layer 1 frame off a copy of the eye, open the Layer 1 copy of the 2 eyes; 4 frames off layer 1 copy 2 eyes, open the Layer 1 copy 3 of the eyes in the alternative of all the frames, set up time of 0.2 seconds.
10 last save animated GIF format.