dangrawo96
06-20-2011, 05:39 PM
* Gamers should have Windows system, popular problems Daquan (one)
CMOS battery failed
CMOS battery failure. General description of this scenario is the energy provide to the motherboard CMOS battery is pretty much dead and require pals in time substitute the motherboard battery.
CMOS verify sum error-Defaults loaded
CMOS implementation of all of the examine finds an error to load the method defaults. Commonly one can find two words to clarify: one is that the motherboard CMOS battery going dead energy supply, and pals can initial attempt a different battery; second explanation is that after replacing the battery if the difficulty nevertheless not resolved, to CMOS RAM may perhaps be a predicament that, if not a yr if your motherboard can visit the dealer for the motherboard, if immediately after a yr returned towards the maker allow dealers fix yourself!
Floppy Disk (s) fall short or Floppy Disk (s) fail (80) or Floppy Disk (s) fall short (forty)
not drive floppy disk generate. Prompted no floppy drive, floppy drive very first to determine the power lines and data lines aren't loose or reversed, it truly is best would be to put floppy on another machine to attempt one, if not possible, then the one selection invest in one, the good news is the present marketplace in the floppy drive can also be expensive.
Difficult disk set up failure
difficult disk installation to fail. This is given that the hard drive energy cable or data lines may not be linked or due to improper jumper settings hard disk. Buddies can verify the tough drive is plugged in the root from the connection to determine in case the two data lines with a tough generate jumper settings are the same. In case you, as long as two distinctive tough generate jumper settings is often (a set to Master, another set to Slave).
Hard disk (s) diagnosis fail
perform hard disk diagnostic error. Such difficulties in general can be a hardware failure inside the drive itself, you are able to place on the hard disk into one more machine to try, should the problem just isn't solved, only to restore a bit lengthier. In the event the alternative time period, then the hard disk is still better to enchant a piece up!
Hardware Monitor found an error, enter Energy MANAGEMENT SETUP for particulars, Press F1 to continue, DEL to enter SETUP
monitoring error is discovered, enter Power MANAGEMENT SETUP see details, or press F1 essential to continue the boot method, press the DEL crucial to enter the CMOS setup. Motherboards are now better equipped together with the hardware monitoring function, end users can set the motherboard and CPU temperature monitoring, voltage regulators, voltage Output Stage lover speed monitoring and surveillance of all, when the monitoring has discovered that at boot time anomaly, then there will likely be this passage, then enter the CMOS configurations buddies can select Power MANAGEMENT SETUP,Windows 7 Professional (http://www.msoffice2007key.com/windows-7-key), at the correct ** Enthusiast Observe **,** Thermal Watch ** and ** Voltage Observe ** see which part from the keep an eye on issued a uncommon scenario, after which add the answer.
Keyboard error or no keyboard current
keyboard error or keyboard not connected. Examine the keyboard interface is connected together with the motherboard, if the keyboard is connected, then the keyboard port is broken motherboard, motherboard for repair if nonetheless within the period of time, and friends can acquire the dealer or the motherboard producers to resolve.
Memory test fail
memory check failed. Reseated memory, to determine if it solved this challenge ordinarily happens given that the combined into the memory just isn't compatible with each other and brought on a conditional, then enchant it! Should you be employing only a memory, then it ought to be the memory by itself includes a challenge, or Sign enchant a great!
Override enable-Defaults loaded
the existing CMOS configurations cannot begin the program, load the BIOS default values in buy to begin the method. CMOS settings are generally within the error, my buddies just visit CMOS settings and select LOAD SETUP DEFAULTS loaded in to the method to prior configurations after which restart to resolve this challenge.
Press ESC to skip memory check
ongoing memory verify, press ESC essential to skip. This can be mainly because there is no setting inside the CMOS memory to skip the second, third and fourth test, the boot will perform four occasions the memory check, certainly, it is easy to press the ESC essential to finish the memory verify, but following each reboot, so each doing too much trouble, you are able to enter the CMOS settings and pick BIOS Functions SETUP, might be one with the Quick Energy On Self Check Enabled is set to open, shop and re-start might be solved.
Resuming from disk, Press TAB to indicate Post display
boot in the hard disk recovery, according to TAB illustrate Publish screen. This really is given that a number of the motherboard market within the BIOS setup gives Suspend to disk (the tough hang) function, if we make use of the Suspend to disk technique to shutdown, then we in the up coming boot, the screen will exhibit this prompted the message.
Secondary slave tough fall short
detection from disk failure. May possibly be brought on by improper CMOS settings. For example, there's no IDE unit is linked through the disk, but inside the CMOS settings are in the disk, then this error happens. If this error occurs, and friends can enter the CMOS settings, select the IDE HDD Car DETECTION to instantly detect the challenging disk. Should you use the above difficulty just isn't resolved, it may be challenging generate energy cable, information cable just isn't connected effectively or even the tough disk jumper settings.
Abort, Retry, Dismiss, fail?
?
exit, retry, dismiss, cancel? Does not understand the command provided, or that it could not carry out to order the disk or unit error, harm or floppy disk may perhaps be not closed the doorway. Press A essential to a total quit, and return to the DOS prompt; Press R key to repeat the command; press I crucial to carry on treatment, ignoring the error, incredibly risky, not suggested; press the F key doesn't execute the command in question to carry on the subsequent therapy.
Access Denied
denied access. Marked as trying to open a read-only, write-protected disk is saved in or locked files around the network. In the event the subdirectory employing Should certainly utilize the
· players have to have common Windows program error Daquan (2) Bad Command or file name
Bad command or file name, doesn't understand the input of the command. Enter the command should certainly examine to guarantee the accuracy of recognition within the specified directory or together with the Path command to specify the research path to discover the command file.
Boot error
boot error. Not detected at boot time due peripherals. Should certainly verify the computer's setup parameters, for example the users on their own can not solve this problem, please try to find unique support personnel.
Cannot find system files
cannot acquire method files. Trying not include method files about the drive in to the running program. Should certainly be utilized: Unless you really cannot restore method files, and may use Format / s command to reformat the disk.
?
Can not load command, program halted
can't load command, system suspend application addresses all or part with the memory Command.com. Will need to reboot the personal computer, verify modified through the application information is complete, if essential, might be copied to the subdirectory Command.com, so exit the DOS applications could be found right here Command.com.
Can't study file allocation table
can't read the file allocation table. File allocation table happens to be poor. If some data can nevertheless be discovered, then they're backed up to an empty disk, Chkdsk can also use command to fix the file allocation table, as crucial, reformat the disk. Should the challenge occurs repeatedly, then it should certainly restore or exchange the generate, drive.
Divide Overflow
distribution of overflow, divide by zero error. System might compose an error, not a superb debugging, but additionally could be associated to memory conflicts with other programs. Examine the memory or other programs no lengthier use this system.
Drive Not Ready Error
drive isn't ready. Didn't put the drive or disk. Verify the disk or replace the disk.
Duplicate File Identify or File Not Found
file the exact same name, or uncover. Give the file a name with all the exact same name as the current file, or file manipulation the reality is not the time this document. Exchange the identify of the file identify or check the spelling.
Error loading operating program
boot the running method error. Running program files lacking or corrupted. Operating system with all the SYS command to duplicate files for the drive, if required, to config.sys and autoexec.bat files are copied towards the root directory. For those who cannot restore program files, then boot from a floppy disk, backup information, employing Format / s command to reformat the disk.
EXEC failure
file to fall short. The application of the executable file that consists of the error at the buried, or given that too various files already open and may not open the file, the file might possibly not compatible using the existing DOS version. Examine the edition of DOS, for instance the version is proper, can edit the Config.sys command within the Files to resolve this predicament.
File allocation table bad
file allocation table is corrupt. A great number of factors, including virus attacks, sudden shutdown, power off, and so can't harm the typical distribution table. Can locate information to back up to an empty disk, do not overwrite previous backups. Possibly by reference Chkdsk command to resolve this dilemma. If important, re-formatted floppy disks, for example the issue recurring, then the drive for restore.
File can't be copied onto alone
can't duplicate files into their own. Your source and target file specified in the identical file, or neglect to compose the file name. Important to change the supply or location file, and then attempt once again.
File creation Error
file build problems. Most likely don't have enough disk area for consumers to generate files, to make the file already exists, and is also read-only file, or would like to use long file names to change the current file identify. To another disk, or use other target identify, other target place, or make use of the Attrib command to eliminate the files read-only attribute.
File not found
file not discovered. In the current directory or from the Path, Append command in any directory specified file just isn't discovered, or the specified directory is empty. Verify the spelling with the file name and place, such as the need to change the search route.
Common failure
basic failure. DOS can't figure out the cause with the error, commonly since the disk drive isn't formatted, or formatted right into a non-DOS systems. Should really be re-formatted disk.
Incorrect DOS edition
DOS version doesn't match. Enter a several edition with the external command. Setver set together with the proper edition, or executable file.
Insufficient Disk Space
disk area. Has no readily available disk room to copy files or generate files. Can delete some ineffective files or exchange a larger disk.
Insufficient memory
memory. Not enough memory to handle the consumer input commands, generally refers to the simple memory. Memory-resident will need to be deleted from the file or do optimize memory management. You'll be able to also include more memory towards the program to match the application.
Invalid directory
illegal directory. Entered an invalid directory identify, or name of the directory doesn't exist. Check the spelling with the directory.
Invalid Generate Specification
invalid drive definition. Did not this generate may well be spelling mistakes. Should the drive can't be specified, it might possibly not install the driver. Reinstall the drive.
Invalid filename or file not found
invalid file name or file not discovered. Enter the file identify is made up of invalid characters or wild card, or will retain the equipment identify as file name. Attempt working with a several file title.
Invalid Media, track 0 Poor or Unusable
invalid format, 0 tracks ruined or unavailable. Normally disk harm. Replace the disk.
CMOS battery failed
CMOS battery failure. General description of this scenario is the energy provide to the motherboard CMOS battery is pretty much dead and require pals in time substitute the motherboard battery.
CMOS verify sum error-Defaults loaded
CMOS implementation of all of the examine finds an error to load the method defaults. Commonly one can find two words to clarify: one is that the motherboard CMOS battery going dead energy supply, and pals can initial attempt a different battery; second explanation is that after replacing the battery if the difficulty nevertheless not resolved, to CMOS RAM may perhaps be a predicament that, if not a yr if your motherboard can visit the dealer for the motherboard, if immediately after a yr returned towards the maker allow dealers fix yourself!
Floppy Disk (s) fall short or Floppy Disk (s) fail (80) or Floppy Disk (s) fall short (forty)
not drive floppy disk generate. Prompted no floppy drive, floppy drive very first to determine the power lines and data lines aren't loose or reversed, it truly is best would be to put floppy on another machine to attempt one, if not possible, then the one selection invest in one, the good news is the present marketplace in the floppy drive can also be expensive.
Difficult disk set up failure
difficult disk installation to fail. This is given that the hard drive energy cable or data lines may not be linked or due to improper jumper settings hard disk. Buddies can verify the tough drive is plugged in the root from the connection to determine in case the two data lines with a tough generate jumper settings are the same. In case you, as long as two distinctive tough generate jumper settings is often (a set to Master, another set to Slave).
Hard disk (s) diagnosis fail
perform hard disk diagnostic error. Such difficulties in general can be a hardware failure inside the drive itself, you are able to place on the hard disk into one more machine to try, should the problem just isn't solved, only to restore a bit lengthier. In the event the alternative time period, then the hard disk is still better to enchant a piece up!
Hardware Monitor found an error, enter Energy MANAGEMENT SETUP for particulars, Press F1 to continue, DEL to enter SETUP
monitoring error is discovered, enter Power MANAGEMENT SETUP see details, or press F1 essential to continue the boot method, press the DEL crucial to enter the CMOS setup. Motherboards are now better equipped together with the hardware monitoring function, end users can set the motherboard and CPU temperature monitoring, voltage regulators, voltage Output Stage lover speed monitoring and surveillance of all, when the monitoring has discovered that at boot time anomaly, then there will likely be this passage, then enter the CMOS configurations buddies can select Power MANAGEMENT SETUP,Windows 7 Professional (http://www.msoffice2007key.com/windows-7-key), at the correct ** Enthusiast Observe **,** Thermal Watch ** and ** Voltage Observe ** see which part from the keep an eye on issued a uncommon scenario, after which add the answer.
Keyboard error or no keyboard current
keyboard error or keyboard not connected. Examine the keyboard interface is connected together with the motherboard, if the keyboard is connected, then the keyboard port is broken motherboard, motherboard for repair if nonetheless within the period of time, and friends can acquire the dealer or the motherboard producers to resolve.
Memory test fail
memory check failed. Reseated memory, to determine if it solved this challenge ordinarily happens given that the combined into the memory just isn't compatible with each other and brought on a conditional, then enchant it! Should you be employing only a memory, then it ought to be the memory by itself includes a challenge, or Sign enchant a great!
Override enable-Defaults loaded
the existing CMOS configurations cannot begin the program, load the BIOS default values in buy to begin the method. CMOS settings are generally within the error, my buddies just visit CMOS settings and select LOAD SETUP DEFAULTS loaded in to the method to prior configurations after which restart to resolve this challenge.
Press ESC to skip memory check
ongoing memory verify, press ESC essential to skip. This can be mainly because there is no setting inside the CMOS memory to skip the second, third and fourth test, the boot will perform four occasions the memory check, certainly, it is easy to press the ESC essential to finish the memory verify, but following each reboot, so each doing too much trouble, you are able to enter the CMOS settings and pick BIOS Functions SETUP, might be one with the Quick Energy On Self Check Enabled is set to open, shop and re-start might be solved.
Resuming from disk, Press TAB to indicate Post display
boot in the hard disk recovery, according to TAB illustrate Publish screen. This really is given that a number of the motherboard market within the BIOS setup gives Suspend to disk (the tough hang) function, if we make use of the Suspend to disk technique to shutdown, then we in the up coming boot, the screen will exhibit this prompted the message.
Secondary slave tough fall short
detection from disk failure. May possibly be brought on by improper CMOS settings. For example, there's no IDE unit is linked through the disk, but inside the CMOS settings are in the disk, then this error happens. If this error occurs, and friends can enter the CMOS settings, select the IDE HDD Car DETECTION to instantly detect the challenging disk. Should you use the above difficulty just isn't resolved, it may be challenging generate energy cable, information cable just isn't connected effectively or even the tough disk jumper settings.
Abort, Retry, Dismiss, fail?
?
exit, retry, dismiss, cancel? Does not understand the command provided, or that it could not carry out to order the disk or unit error, harm or floppy disk may perhaps be not closed the doorway. Press A essential to a total quit, and return to the DOS prompt; Press R key to repeat the command; press I crucial to carry on treatment, ignoring the error, incredibly risky, not suggested; press the F key doesn't execute the command in question to carry on the subsequent therapy.
Access Denied
denied access. Marked as trying to open a read-only, write-protected disk is saved in or locked files around the network. In the event the subdirectory employing Should certainly utilize the
· players have to have common Windows program error Daquan (2) Bad Command or file name
Bad command or file name, doesn't understand the input of the command. Enter the command should certainly examine to guarantee the accuracy of recognition within the specified directory or together with the Path command to specify the research path to discover the command file.
Boot error
boot error. Not detected at boot time due peripherals. Should certainly verify the computer's setup parameters, for example the users on their own can not solve this problem, please try to find unique support personnel.
Cannot find system files
cannot acquire method files. Trying not include method files about the drive in to the running program. Should certainly be utilized: Unless you really cannot restore method files, and may use Format / s command to reformat the disk.
?
Can not load command, program halted
can't load command, system suspend application addresses all or part with the memory Command.com. Will need to reboot the personal computer, verify modified through the application information is complete, if essential, might be copied to the subdirectory Command.com, so exit the DOS applications could be found right here Command.com.
Can't study file allocation table
can't read the file allocation table. File allocation table happens to be poor. If some data can nevertheless be discovered, then they're backed up to an empty disk, Chkdsk can also use command to fix the file allocation table, as crucial, reformat the disk. Should the challenge occurs repeatedly, then it should certainly restore or exchange the generate, drive.
Divide Overflow
distribution of overflow, divide by zero error. System might compose an error, not a superb debugging, but additionally could be associated to memory conflicts with other programs. Examine the memory or other programs no lengthier use this system.
Drive Not Ready Error
drive isn't ready. Didn't put the drive or disk. Verify the disk or replace the disk.
Duplicate File Identify or File Not Found
file the exact same name, or uncover. Give the file a name with all the exact same name as the current file, or file manipulation the reality is not the time this document. Exchange the identify of the file identify or check the spelling.
Error loading operating program
boot the running method error. Running program files lacking or corrupted. Operating system with all the SYS command to duplicate files for the drive, if required, to config.sys and autoexec.bat files are copied towards the root directory. For those who cannot restore program files, then boot from a floppy disk, backup information, employing Format / s command to reformat the disk.
EXEC failure
file to fall short. The application of the executable file that consists of the error at the buried, or given that too various files already open and may not open the file, the file might possibly not compatible using the existing DOS version. Examine the edition of DOS, for instance the version is proper, can edit the Config.sys command within the Files to resolve this predicament.
File allocation table bad
file allocation table is corrupt. A great number of factors, including virus attacks, sudden shutdown, power off, and so can't harm the typical distribution table. Can locate information to back up to an empty disk, do not overwrite previous backups. Possibly by reference Chkdsk command to resolve this dilemma. If important, re-formatted floppy disks, for example the issue recurring, then the drive for restore.
File can't be copied onto alone
can't duplicate files into their own. Your source and target file specified in the identical file, or neglect to compose the file name. Important to change the supply or location file, and then attempt once again.
File creation Error
file build problems. Most likely don't have enough disk area for consumers to generate files, to make the file already exists, and is also read-only file, or would like to use long file names to change the current file identify. To another disk, or use other target identify, other target place, or make use of the Attrib command to eliminate the files read-only attribute.
File not found
file not discovered. In the current directory or from the Path, Append command in any directory specified file just isn't discovered, or the specified directory is empty. Verify the spelling with the file name and place, such as the need to change the search route.
Common failure
basic failure. DOS can't figure out the cause with the error, commonly since the disk drive isn't formatted, or formatted right into a non-DOS systems. Should really be re-formatted disk.
Incorrect DOS edition
DOS version doesn't match. Enter a several edition with the external command. Setver set together with the proper edition, or executable file.
Insufficient Disk Space
disk area. Has no readily available disk room to copy files or generate files. Can delete some ineffective files or exchange a larger disk.
Insufficient memory
memory. Not enough memory to handle the consumer input commands, generally refers to the simple memory. Memory-resident will need to be deleted from the file or do optimize memory management. You'll be able to also include more memory towards the program to match the application.
Invalid directory
illegal directory. Entered an invalid directory identify, or name of the directory doesn't exist. Check the spelling with the directory.
Invalid Generate Specification
invalid drive definition. Did not this generate may well be spelling mistakes. Should the drive can't be specified, it might possibly not install the driver. Reinstall the drive.
Invalid filename or file not found
invalid file name or file not discovered. Enter the file identify is made up of invalid characters or wild card, or will retain the equipment identify as file name. Attempt working with a several file title.
Invalid Media, track 0 Poor or Unusable
invalid format, 0 tracks ruined or unavailable. Normally disk harm. Replace the disk.