china038
04-07-2011, 03:41 PM
,Microsoft Office 2007 Professional Plus (http://www.office2007-key.org/)
Sponsored Links Windows Vista Top rated Explanations to avoid Vista Dual Booting Windows Vista and Windows XP Clean Install Windows Vista other sections Content articles Blog site Genetic Engineering Greeting Cards IT Display 2011 Singapore Laughter HELL! Nokia N95 NSeries Previous Projects PHP AJAX Domain Availability Checker Planescape: Torment Ultima Worlds Windows XP Windows Vista A lot more... singapore providers Singapore Web Design and style Search engine marketing Singapore Personal computer / Home computer / Laptop Repair Service Video Conversion Hi8 Video8 miniDv VHS to DVD Services
Tutorial to Dual Booting Windows XP and Windows 7 / Windows Vista With Windows 7 / Windows Vista Already Installed
Edition 0.52
This post displays the best way to set up Windows XP with Windows seven / Windows Vista presently set up. No data shall be lost, no further software programs is required and you'll select which working strategy to boot everytime you power on your procedure.
DISCLAIMER: Move forward at your own personal danger! The data right here is correct on the top of my understanding. I will not be held responsible if this document leads to your personal pc to explode or burst into flames. In true serious terms, if any corruption of info, hardware hurt or every other type of damage/losses/etc. arises from your utilization of this document, I will not be responsible for it. In case you don't like this,Office 2010 Code (http://www.office2010-key.eu/), please will not browse any even more. Do accomplish a entire BACKUP of your respective files to an exterior drive previous to executing these kinds of operations.
Is this document meant for you personally? You must set up Windows XP in a laptop or computer that has only Windows seven / Windows Vista set up You could have crafted a backup of the model just in case a little something goes incorrect Swift Directs What's Needed Planning of XP Set up Drive Installing Windows XP Reinstating Windows 7 / Windows Vista Again Putting Back XP during the Boot Menu Assumptions This guideline assumes you wish to set up Windows XP into Drive D. If you want to install to one additional drive, substitute the right drive letter for D. This guidebook assumes Windows seven / Windows Vista is put in in Drive C Windows 7 Strategy Restore Factors will undoubtedly be deleted while you boot to XP. This is certainly regular, and can only be avoided if you happen to conceal the Windows Vista / Windows 7 drive from Windows XP. If your tough disk is SATA, it must possibly be operating on Enhanced IDE mode rather than in AHCI mode.
one) What exactly is Desired Windows 7 / Windows Vista Unique Set up DVD XP Installation Disc (preferably SP3) A drive with not less than 5GB free space two) Preparing of XP Set up Drive
This guide will suppose that you're going to be setting up XP to Drive D. Should you have no this sort of drive, this guideline will present you find out how to create a 'Drive D'.
Click Launch Click Laptop or computer Below Tricky Drives,Windows 7 Ultimate Key (http://www.key-windows-7.co.uk/), there should be one particular labeled "Local Disk C:"
If you happen to don't have a Drive D, you must produce a new partition. There is no Drive D in this image, so we are going to make 1 For those who don't have a Drive D with at the very least 5GB totally free area,Windows 7 Ultimate Product Key (http://www.windows-7-key.us/), you need to make a partition as below. Creating a Partition
Skip this part if you ever already have a Drive D with at least 5GB of no cost room as soon as you would like to install Windows XP to.
Click on Start out On the right column, right-click Laptop on the left column Click Manage Vista ought to pop a User Account Control box, click Continue Laptop or computer Management window opens Within the left column, expand Storage to reveal Disk Management. Click Disk Management
Disk Management Right-click the shaded area (or the area labeled C:) Click on Shrink Volume... In "Enter the amount of space to shrink in MB",Microsoft Office 2007 Professional Plus (http://www.msoffice2007key.net/), enter the amount of space in MegaBytes that you simply desire to dedicate for Windows XP. We recommend at least 5GB (that's 5,000 MB (MegaBytes)).
Once you are planning to use XP as your main working procedure, you may desire to dedicate additional area for the drive as the process shall be harder after installation of XP. Remember to ensure that Windows seven / Window Vista's drive has sufficient area left for its individual use (no less than 15GB) Click on Shrink
A new 'Unallocated' partition is created beside C drive
Right-click the Unallocated partition Click on New Simple Volume... Click Next 2 times Note the drive letter assigned below "Assign the following drive letter". In our circumstance, it is E as the letter D is previously taken up by the CD-ROM drive. We will need to fix this later on. Click on Next. Enter a name for the drive under "Volume Label". You may desire to name it WINXP. Place a checkmark for "Accomplish a rapid format"
Click Next Click on Finish
The new drive might be formatted and created ready to be used Changing Drive Letters
Note: Skip this part if your Drive D presently points to a valid challenging drive partition rather than to a CD-ROM drive.
Our new partition is now Drive E. For cosmetics sake, we prefer the new drive to be Drive D. In the event you are fine (or require it to be these for some compatibility reason) Drive D to be the CD-ROM drive and E being the Windows XP drive, you are able to skip this part.
In your task bar, close all programs except Laptop Management At Personal pc Management, with Disk Management selected on the left, right-click the CD-ROM (D:) and click on Change Drive Letter and Paths... Click on Change... Under "Assign the following drive letter", select K (or every other letter besides D) Click on OK Click on OK for the warning that appears Right-click the newly created partition labeled E: and click Change Drive Letter and Paths... Click on Change... Below "Assign the following drive letter", select D Click on OK Click OK for the warning that appears Right-Click the CD-ROM (K:) and click Change Drive Letter and Paths... Click on Change... Under "Assign the following drive letter", select E (or every other letter besides D) Click OK Click on OK for the warning that appears
The drives now have nicely assigned drive letters
At this point Drive D is ready for set up of Windows XP. 3) Setting up Windows XP Now we proceed to install Windows XP. Insert the Windows XP Installation Disc into your Computer Restart your Personal computer and look for the "Press any key to boot from CD ..." prompt and quickly hit Enter. You only have a few seconds to do this prior to it proceeds to get started Vista
After you hit Enter, it will take sometime for Windows XP Setup to begin. If you happen to never see the prompt no matter how many times you restart, you need to configure your BIOS to boot from CD. At the welcome page, press Enter Accept the licence agreement by hitting F8 At the set up drive selection page, select the newly created D drive by hitting the down arrow in your keyboard. Do NOT select the default entry, which is Drive C.
For Windows 7 systems: Drive C may be labeled as "Procedure Rese". In this case, you will need to select Drive E. You're able to verify that it is the correct drive by checking whether the name in brackets for that row matches the name you gave just now in Step 2, which we suggested to give it as WinXP. While in the image above, we gave it the name "New Volume" when we created the new drive.
Press Enter Inside the file model selection page, highlight the option "Leave the current file strategy intact (no changes)". Do NOT highlight any of the Format options. This needs to be by now selected by default. At this stage, you are still able to boot Vista as per typical and you'll terminate this tutorial safely if you ever wish.
Proceeding to the next step will set up XP and make Windows 7 / Windows Vista unbootable unless you follow the entire tutorial. Press Enter
Windows XP will begin installing to Drive D (or on the drive you selected). Follow prompts normally until you see the Windows Bliss (the trademark wallpaper) . 4) Reinstating Windows seven / Windows Vista Again
At this stage, you should really have completed setting up Windows XP to Drive D (or to your drive you selected). You would have noticed you can only boot into Windows XP now.
We need to fix Windows seven / Windows Vista again together with XP and that is where the Windows seven / Windows Vista installation disc comes in
Insert the Windows 7 / Windows Vista DVD and restart your Pc Restart your Pc and look for the "Press any key to boot from CD or DVD . . ." prompt and quickly hit Enter. You only have a few seconds to do this just before it proceeds to initiate XP
Press any key to boot from CD or DVD . . .
Click Next at the "Install Windows" screen. Click Fix your computer system at the bottom left of the window
Windows seven / Windows Vista Setup searches for Windows 7 / Windows Vista installations After the search is completed, click Next
Strategy Recovery Click Startup Fix. For Windows 7 systems, just move forward to click on Next.
Vista Setup will attempt to repair the boot sector Click Finish 5) Putting Again XP inside Boot Menu
After the restart, you must be back in Windows 7 / Windows Vista now. Unfortunately, now you cannot access Windows XP. Here's tips on how to put back again XP into the boot menu.
Option one: Run a Batch File (Automated) Right-click this link and Save Target As Save to your desktop Insert the Windows seven / Windows Vista Setup disc to your E drive If your drive letters are different, you may need to EDIT the bat file and replace E: with the suitable drive letter (thanks juliabird) Go to your Desktop. Right-Click the file, and click on Run as administrator
Note: The third command may give an error which can be safely ignored.
Option two: Run Commands Manually Insert the Windows 7 / Windows Vista Setup disc to your E drive Click Get started Type CMD and press Ctrl+Shift+Enter (press and hold Ctrl, press and hold Shift, press and hold Enter, release all) Windows should really pop a User Account Control box, click on Continue You should see a command prompt.
After typing each line below, press Enter in your keyboard. Do NOT copy and paste, you must type it out. Note that we are assuming Drive E to contain your Windows seven / Windows Vista set up disc and Drive C to contain the Windows 7 / Windows Vista set up. Substitute the drive letters within the 2nd and 4th lines where desired.
cd %windir%
e:\boot\bootsect.exe -NT60 All
%windir%\system32\Bcdedit -create ntldr -d "XP"
%windir%\system32\Bcdedit –set ntldr device partition=c:
%windir%\system32\Bcdedit –set ntldr path \ntldr
%windir%\system32\Bcdedit –displayorder ntldr –addlast
Note: The third command may give an error which can be safely ignored.
The DOS Commands and the responses
For Windows 7 systems, you will definitely need to additionally copy the NTLDR and NTDETECT.COM files through the Windows XP Disc to your C Drive. Go to Launch > Home computer Right-click your CD-ROM drive containing your Windows XP Disc and click Open On the top rated right of the window, type NTLDR in the search box Copy that file to your C Drive (Select the file > Organize > Copy > Go to C Drive > Organize > Paste) Search for NTDETECT and copy that file as well to C Drive [ thanks to distrakted ]
That's it. Restart your technique, and a menu will appear to ask your choice of operating procedure to boot up.
If you get errors like "The boot configuration information store could not be opened" - you are not running the file / command prompt as a administrator.
Revisions July 26 2008 - v0.5 First Release for the public in Bootstrike.Com Sept 23 2010 - v0.52 Updated for Windows 7, which is similar to Vista
Last Updated 23rd September 2010
Errors? Omissions? Need Help? Know a thing? Post your queries inside the comments below
This document is Copyright(©) 2001-2010 by G.Ganesh.
12 comments
Sponsored Links Windows Vista Top rated Explanations to avoid Vista Dual Booting Windows Vista and Windows XP Clean Install Windows Vista other sections Content articles Blog site Genetic Engineering Greeting Cards IT Display 2011 Singapore Laughter HELL! Nokia N95 NSeries Previous Projects PHP AJAX Domain Availability Checker Planescape: Torment Ultima Worlds Windows XP Windows Vista A lot more... singapore providers Singapore Web Design and style Search engine marketing Singapore Personal computer / Home computer / Laptop Repair Service Video Conversion Hi8 Video8 miniDv VHS to DVD Services
Tutorial to Dual Booting Windows XP and Windows 7 / Windows Vista With Windows 7 / Windows Vista Already Installed
Edition 0.52
This post displays the best way to set up Windows XP with Windows seven / Windows Vista presently set up. No data shall be lost, no further software programs is required and you'll select which working strategy to boot everytime you power on your procedure.
DISCLAIMER: Move forward at your own personal danger! The data right here is correct on the top of my understanding. I will not be held responsible if this document leads to your personal pc to explode or burst into flames. In true serious terms, if any corruption of info, hardware hurt or every other type of damage/losses/etc. arises from your utilization of this document, I will not be responsible for it. In case you don't like this,Office 2010 Code (http://www.office2010-key.eu/), please will not browse any even more. Do accomplish a entire BACKUP of your respective files to an exterior drive previous to executing these kinds of operations.
Is this document meant for you personally? You must set up Windows XP in a laptop or computer that has only Windows seven / Windows Vista set up You could have crafted a backup of the model just in case a little something goes incorrect Swift Directs What's Needed Planning of XP Set up Drive Installing Windows XP Reinstating Windows 7 / Windows Vista Again Putting Back XP during the Boot Menu Assumptions This guideline assumes you wish to set up Windows XP into Drive D. If you want to install to one additional drive, substitute the right drive letter for D. This guidebook assumes Windows seven / Windows Vista is put in in Drive C Windows 7 Strategy Restore Factors will undoubtedly be deleted while you boot to XP. This is certainly regular, and can only be avoided if you happen to conceal the Windows Vista / Windows 7 drive from Windows XP. If your tough disk is SATA, it must possibly be operating on Enhanced IDE mode rather than in AHCI mode.
one) What exactly is Desired Windows 7 / Windows Vista Unique Set up DVD XP Installation Disc (preferably SP3) A drive with not less than 5GB free space two) Preparing of XP Set up Drive
This guide will suppose that you're going to be setting up XP to Drive D. Should you have no this sort of drive, this guideline will present you find out how to create a 'Drive D'.
Click Launch Click Laptop or computer Below Tricky Drives,Windows 7 Ultimate Key (http://www.key-windows-7.co.uk/), there should be one particular labeled "Local Disk C:"
If you happen to don't have a Drive D, you must produce a new partition. There is no Drive D in this image, so we are going to make 1 For those who don't have a Drive D with at the very least 5GB totally free area,Windows 7 Ultimate Product Key (http://www.windows-7-key.us/), you need to make a partition as below. Creating a Partition
Skip this part if you ever already have a Drive D with at least 5GB of no cost room as soon as you would like to install Windows XP to.
Click on Start out On the right column, right-click Laptop on the left column Click Manage Vista ought to pop a User Account Control box, click Continue Laptop or computer Management window opens Within the left column, expand Storage to reveal Disk Management. Click Disk Management
Disk Management Right-click the shaded area (or the area labeled C:) Click on Shrink Volume... In "Enter the amount of space to shrink in MB",Microsoft Office 2007 Professional Plus (http://www.msoffice2007key.net/), enter the amount of space in MegaBytes that you simply desire to dedicate for Windows XP. We recommend at least 5GB (that's 5,000 MB (MegaBytes)).
Once you are planning to use XP as your main working procedure, you may desire to dedicate additional area for the drive as the process shall be harder after installation of XP. Remember to ensure that Windows seven / Window Vista's drive has sufficient area left for its individual use (no less than 15GB) Click on Shrink
A new 'Unallocated' partition is created beside C drive
Right-click the Unallocated partition Click on New Simple Volume... Click Next 2 times Note the drive letter assigned below "Assign the following drive letter". In our circumstance, it is E as the letter D is previously taken up by the CD-ROM drive. We will need to fix this later on. Click on Next. Enter a name for the drive under "Volume Label". You may desire to name it WINXP. Place a checkmark for "Accomplish a rapid format"
Click Next Click on Finish
The new drive might be formatted and created ready to be used Changing Drive Letters
Note: Skip this part if your Drive D presently points to a valid challenging drive partition rather than to a CD-ROM drive.
Our new partition is now Drive E. For cosmetics sake, we prefer the new drive to be Drive D. In the event you are fine (or require it to be these for some compatibility reason) Drive D to be the CD-ROM drive and E being the Windows XP drive, you are able to skip this part.
In your task bar, close all programs except Laptop Management At Personal pc Management, with Disk Management selected on the left, right-click the CD-ROM (D:) and click on Change Drive Letter and Paths... Click on Change... Under "Assign the following drive letter", select K (or every other letter besides D) Click on OK Click on OK for the warning that appears Right-click the newly created partition labeled E: and click Change Drive Letter and Paths... Click on Change... Below "Assign the following drive letter", select D Click on OK Click OK for the warning that appears Right-Click the CD-ROM (K:) and click Change Drive Letter and Paths... Click on Change... Under "Assign the following drive letter", select E (or every other letter besides D) Click OK Click on OK for the warning that appears
The drives now have nicely assigned drive letters
At this point Drive D is ready for set up of Windows XP. 3) Setting up Windows XP Now we proceed to install Windows XP. Insert the Windows XP Installation Disc into your Computer Restart your Personal computer and look for the "Press any key to boot from CD ..." prompt and quickly hit Enter. You only have a few seconds to do this prior to it proceeds to get started Vista
After you hit Enter, it will take sometime for Windows XP Setup to begin. If you happen to never see the prompt no matter how many times you restart, you need to configure your BIOS to boot from CD. At the welcome page, press Enter Accept the licence agreement by hitting F8 At the set up drive selection page, select the newly created D drive by hitting the down arrow in your keyboard. Do NOT select the default entry, which is Drive C.
For Windows 7 systems: Drive C may be labeled as "Procedure Rese". In this case, you will need to select Drive E. You're able to verify that it is the correct drive by checking whether the name in brackets for that row matches the name you gave just now in Step 2, which we suggested to give it as WinXP. While in the image above, we gave it the name "New Volume" when we created the new drive.
Press Enter Inside the file model selection page, highlight the option "Leave the current file strategy intact (no changes)". Do NOT highlight any of the Format options. This needs to be by now selected by default. At this stage, you are still able to boot Vista as per typical and you'll terminate this tutorial safely if you ever wish.
Proceeding to the next step will set up XP and make Windows 7 / Windows Vista unbootable unless you follow the entire tutorial. Press Enter
Windows XP will begin installing to Drive D (or on the drive you selected). Follow prompts normally until you see the Windows Bliss (the trademark wallpaper) . 4) Reinstating Windows seven / Windows Vista Again
At this stage, you should really have completed setting up Windows XP to Drive D (or to your drive you selected). You would have noticed you can only boot into Windows XP now.
We need to fix Windows seven / Windows Vista again together with XP and that is where the Windows seven / Windows Vista installation disc comes in
Insert the Windows 7 / Windows Vista DVD and restart your Pc Restart your Pc and look for the "Press any key to boot from CD or DVD . . ." prompt and quickly hit Enter. You only have a few seconds to do this just before it proceeds to initiate XP
Press any key to boot from CD or DVD . . .
Click Next at the "Install Windows" screen. Click Fix your computer system at the bottom left of the window
Windows seven / Windows Vista Setup searches for Windows 7 / Windows Vista installations After the search is completed, click Next
Strategy Recovery Click Startup Fix. For Windows 7 systems, just move forward to click on Next.
Vista Setup will attempt to repair the boot sector Click Finish 5) Putting Again XP inside Boot Menu
After the restart, you must be back in Windows 7 / Windows Vista now. Unfortunately, now you cannot access Windows XP. Here's tips on how to put back again XP into the boot menu.
Option one: Run a Batch File (Automated) Right-click this link and Save Target As Save to your desktop Insert the Windows seven / Windows Vista Setup disc to your E drive If your drive letters are different, you may need to EDIT the bat file and replace E: with the suitable drive letter (thanks juliabird) Go to your Desktop. Right-Click the file, and click on Run as administrator
Note: The third command may give an error which can be safely ignored.
Option two: Run Commands Manually Insert the Windows 7 / Windows Vista Setup disc to your E drive Click Get started Type CMD and press Ctrl+Shift+Enter (press and hold Ctrl, press and hold Shift, press and hold Enter, release all) Windows should really pop a User Account Control box, click on Continue You should see a command prompt.
After typing each line below, press Enter in your keyboard. Do NOT copy and paste, you must type it out. Note that we are assuming Drive E to contain your Windows seven / Windows Vista set up disc and Drive C to contain the Windows 7 / Windows Vista set up. Substitute the drive letters within the 2nd and 4th lines where desired.
cd %windir%
e:\boot\bootsect.exe -NT60 All
%windir%\system32\Bcdedit -create ntldr -d "XP"
%windir%\system32\Bcdedit –set ntldr device partition=c:
%windir%\system32\Bcdedit –set ntldr path \ntldr
%windir%\system32\Bcdedit –displayorder ntldr –addlast
Note: The third command may give an error which can be safely ignored.
The DOS Commands and the responses
For Windows 7 systems, you will definitely need to additionally copy the NTLDR and NTDETECT.COM files through the Windows XP Disc to your C Drive. Go to Launch > Home computer Right-click your CD-ROM drive containing your Windows XP Disc and click Open On the top rated right of the window, type NTLDR in the search box Copy that file to your C Drive (Select the file > Organize > Copy > Go to C Drive > Organize > Paste) Search for NTDETECT and copy that file as well to C Drive [ thanks to distrakted ]
That's it. Restart your technique, and a menu will appear to ask your choice of operating procedure to boot up.
If you get errors like "The boot configuration information store could not be opened" - you are not running the file / command prompt as a administrator.
Revisions July 26 2008 - v0.5 First Release for the public in Bootstrike.Com Sept 23 2010 - v0.52 Updated for Windows 7, which is similar to Vista
Last Updated 23rd September 2010
Errors? Omissions? Need Help? Know a thing? Post your queries inside the comments below
This document is Copyright(©) 2001-2010 by G.Ganesh.
12 comments